Setlite
Setlite Setlite Setlite Setlite Setlite Setlite
Setlite Engineers Limited Setlite Engineers Limited china wheel loader, wheel loader suppliers china wheel loader suppliers, wheel loader exporters
Setlite
Setlite
Setlite

HOME » PRODUCTS » XCMG WHEEL LOADER & MOTOR GRADER


XCMG WHEEL LOADER & MOTOR GRADER

We are authorized distributors of XUZHOU CONSTRUCTION MACHINERY GROUP IMP. & EXP. CO., LTD. China for Marketing and Providing after Sales Service in India. Our range of Wheel loaders are made available in the market only after quality checks ensuring high performance. Most importantly, our wheel loaders can be maintained at a very low cost.


Motor Grader GR Series GR - 165
China Wheel Loader

Specification
Engine Model DL114ZG9B
Rated Power/Speed 125KW (170hp)/2200rpm
Dimension (LxwxH)(Standard) 9242 x 2601 x 3430mm
Operating Weight (Standard) 15000kg
Tire Size 17.5-25RP12
Min. Round Clearance 430mm
Distance Between Front and Rear Axles 6266mm
Distance Between Middle and Rear Wheels 1639mm
Operating Specification
Max. Steenng Angle of Front Wheels ±45°
Max. Lean Angle of Front Wheels ±17°
Max. Oscillation Angle or Front Axle ±15°
Frame Articulation Angle ±25°
Min. Turning Radius Using Articulation 7.8m
Maximum Lift Above Ground 460mm
Maximum Depth of Cutting 500mm
Maximum Blade Position Angle 90°
Blade Cutting Angle 28° ~ 70°
Circle Reversing Rotation 360°
Moldboard Width x Height 3965 x 610mm
Performance Specification
Travelling Speed, Forward 5, 8, 11, 19, 23, 38km/h
Travelling Speed, Reverse 5, 11, 23km/h
Max. Tractive Force 77KN
Max. Gradeabihty 20°
Tire Inflation Pressure 2.6bar
Working Hydraulic Pressure 18Mpa
Transmission Pressure 1.3 ~ 1.8Mpa
Availability Ready Stock




Wheel Loader Model ZL - 50 G


Specification
Bucket Capacity 3.0 m3
Rated Load 5,000 kg
Engine
Model Electronic QSB6.7
Type 4-stroke, direct-injection, water cooled, exhaust turbo charger, air-to-air after cooled
Rated Power 152.7KW / 205HP
Rated Speed 2200r/min
Max. Torque 991N.m / 1400r/min
Number of Cylinders
Bore x Stroke 114 x 125mm / 4.5'' x 5.3''
Displacement 8.27L / 505.3in3
Compression Ratio 18 : 1
Batteries 2 x 12V / 195A.h
Starter 24V 7.5KW
Alternator 24V 50A
Transmission
Make and Model ZF 4WG200 or HANGZHOU 4WG180
Type Power-shift (electric hydraulic) countershaft design with four forward and three reverse Speeds
Control Single Lever Control
Forward Speeds km/h (MPH)
Ist 6.5 (3.99)
2nd 11 0 (6.75)
3rd 24.0 (14.74)
4th 38.0 (23.33)
Reverse Speeds km/h (MPH)
Ist 6 5 (3.99)
2nd 11.0 (6.75)
3rd 24 0 (14.74)
Axle
Model Meritor 20/18 MRF-C216NZE/NZF
Driving System Four-wheel driving
Rear Axle Oscillation Center oscillation
Carrier Assembly-Reduction Ratio 4.625
Wheel end reduction assembly-Reduction Ratio 4 94
Brake
Type Air-over-hvdraulic disc on tour wheels brakes
Driving Brake System Pressure 0.686 ~ 0.784 Mpa
Emergent and Stopping System Pressure 0 45 Mpa
Parking Brake Inner-expanding shoe brake, air cylinder and spring energy reserve applied via a switch on the control stand panel.
Tires
Type Tube
Specification 23.5-25-16PR (L3)
Specifications for working Hydraulic System
Working Pump (Gear)
Max. Flow Rate 100ml/r
Max. Working Pressure 17.5MPa
Control Pilot
Double-Acting Hydraulic Cylinders Bore x stroke
Loader Arm 160mm(6.3") X859mmf33.5")
Bucket 180mm(7.1") x 567mm(22.3")
Operating Time
Lift 6.5sec
Lower 3.5sec
Dump 1.5sec
Specifications for Steering Hydraulic System
Type Articulation, fully hydraulic power steerim with flow-amplified system
Steering Pump (Gear)
Max. Flow Rate 63ml/r
Max. Working Pressure 16MPa
Cylinder
Bore x Stroke 90 x 340mm
Max. Steering Angle ±35°
Service Refill Capacities
Fuel Tank 230 liters
Engine Oil 22 liters
Cooling System 50 liters
Transmission 28 liters
Hydraulic Tank 200 liters
Axle 38 liters
Brake 6kg
Availability Ready Stock


Wheel Loader Suppliers


Wheel Loader Model ZL - 30 G
China Wheel Loader Suppliers
  • Optimum design of working device,dumping clearance,dumping reach,breakout force,raising capacity,short total cycling time,automatic leveling at high position,and greater productivity.
  • Center-point frame articulated, small turning radius and front and rear wheels track reduce resistance and tyre wear and improve the going-through capability of the whole machine.
  • Fully hydraulic steering,power shift transmission,flexable operation.
  • Key-block type propeller shaft,resistance against strike is strong,Power transmitting is reliable.
  • Air-valva control band type emergency brake system,safty and reliability.
  • Integated hood made of compound material,right and left open,auto-lock,reduce sound.Operation and maintenance easy.
  • The design of luxury cab egnomically,excellent sight.Operational air conditioner provides operator with a comfortable job environment.

ZL30G wheel loader main specification
Description Specification 1.8 Cubic Meter
Operating Weight 10.7 Ton
Bucket Capacity 1.7 m3
Rated Load 3000 kg
Dumping Clearnce 2800 mm
Dumping Reach 1030 mm
Raising time <6 s
Total Cycling Time <10 s
Max. Traction Force 90 kN
Max. Breakout Force 110 kN
Articulation Angle 40±1 °
Min. Turning Radius <4800 mm
Gradability 28 °
Wheel Base 2700 mm
Track 1850 mm
Travel Speed
I1st(F/R) 7.8/9.5 km/h
2nd(F/R) 13/28 km/h
3rd(F) 25 km/h
4th(F) 35 km/h
Engine Model YC6105G-1640H
Rated Power / Rated Speed 85kw/2300r/min
LxWxH 6830×2460×3170 mm
Operating Weight 10.5 t
Tyres 17.5-25
Availability Ready Stock






Setlite
Our Product Range
Setlite

Setlite Setlite